OBD Error Cleaner (Truck) Mercedes MP V
For DAF, IVECO, MAN, Mercedes, Renault, Scania, Volvo
120 € + VAT145.20 € incl. VAT
Permanently eliminate fault restrictions and get back to full power.
- Works with truck parked and ignition ON (engine off)
- Plug & Play: no computer or software needed
- Compatible with Euro 5 and Euro 6 trucks
- Re-usable across vehicles of the same make and generation
Some devices change or switch off functions of a vehicle’s emission control or other systems. Rules on using such devices differ between countries and may prohibit their use on public roads. Terms and Conditions, section 3
Fast EU shipping (3-5 days)
Plug & play installation
~60 second activation
12-month warrantyProduct description
Mercedes MP V |
Get your Mercedes back on the road faster with LOGmatic, a compact Plug & Play diagnostic tool designed to clear fault codes and temporarily restore normal engine operation on supported trucks.
LOGmatic is designed for Mercedes MP V trucks , with particular focus on aftertreatment-related faults and other electronic errors that can trigger warning lights, limp mode, or engine derate.
Instead of spending valuable time waiting for a diagnostic appointment, LOGmatic provides a fast way to read/clear supported DTCs and reset fault conditions directly through the vehicle's diagnostic connection.
What LOGmatic can do
- Clear supported diagnostic trouble codes (DTCs)
- Clear aftertreatment system errors
- Temporarily disable limp mode / engine derate where supported
- Reset supported warning and fault conditions
- Help restore engine power after certain fault events
- Reduce unnecessary downtime
- Useful for roadside and workshop diagnostics
- Plug & Play operation
- No laptop required
- No ECU programming required
- Compact and easy to carry in the truck
Designed for aftertreatment faults
LOGmatic is particularly useful when dealing with faults related to modern Euro 6 aftertreatment systems, including supported:
- DPF faults
- SCR system faults
- DEF / AdBlue faults
- NOx sensor faults
- Exhaust temperature sensor faults
- DPF differential pressure faults
- Regeneration-related faults
- Aftertreatment warning messages
- Other supported engine and vehicle DTCs
Depending on the vehicle and fault, LOGmatic can clear the stored error and temporarily restore normal operation. It does not permanently repair a failed mechanical or electronic component.
Fast & simple
Connect LOGmatic to the vehicle's diagnostic port and clear the supported fault codes.
No diagnostic laptop, special software subscription, or complicated programming procedure is required.
Compatible trucks
- Mercedes MP V
Compatibility depends on the exact vehicle configuration, ECU/diagnostic system, and fault code.
Important
LOGmatic is an error-clearing and temporary recovery tool. Clearing a DTC does not repair the underlying mechanical, electrical, sensor, or emissions-system problem. If the fault remains present, the code may return after the vehicle is operated again.
LOGmatic: clear the error, get moving, diagnose the problem later.
Simple process
How it works in three steps
Connect to diagnostic port
Locate the OBD-II port in your cab or machine cab (usually near the steering column) and plug in the device. No tools required.
Activate: ~60 seconds
Turn on the ignition. The device reads and resets DPF, limp mode or emission system fault codes automatically in about 60 seconds.
Back to full power
Once the cycle completes the fault codes are cleared and your vehicle returns to normal operation. Remove the device and drive.
Connect to diagnostic port
Locate the OBD-II port in your cab or machine cab (usually near the steering column) and plug in the device. No tools required.
Activate: ~60 seconds
Turn on the ignition. The device reads and resets DPF, limp mode or emission system fault codes automatically in about 60 seconds.
Back to full power
Once the cycle completes the fault codes are cleared and your vehicle returns to normal operation. Remove the device and drive.